DIY tools for hanging wooden tablets

Have you ever put on the shelf, which began to fall with the weight or even lower.
Each platform has a weight limit, but also require different anchors and support for conservation equipment that you select.
Hanging shelves is a great DIY project of wood. In this article I'll tell you what tools you need and how to hang the shelves properly never give back.
You can put heavy shelves in your garage or shed. They may have many of their tools. This way you can easily find what tools you need.
In addition, you can hang decorative shelves in any room of the house. The many options today for a variety of platforms.
You can have glass shelves, and all wooden shelves, you can also use cheaper materials and paint to suit any room in the house.
I compiled a list of tools you need to build your own shelves. I also wanted to explain the many types of media and conservation materials that are available.
The most important lesson on the shelves suspended, using the right material for any purpose that the tablets are used.
If you put shelves in the garage to store tools or heavy objects such as cans of paint, it is important to use the right materials and how to anchor the shelf most of the force.
Any type of platform has a different weight limit, therefore, it is important to use good support for any application that uses the shelves.
By choosing the fixed supports can be selected very decorative heavyweight.
For carriers that offer the best strength of its holder to select those with diagonal supports.
Tips for hanging shelves
When you start to attach the highest bracket to the wall and the short arm of the platform. Where possible, always anchor supports on the wall. This gives much more robust rays.
If you find you have to define their supports between the joists, always use mollies and toggle bolts. Be sure to follow the weight limits when using minnows and manufacturers of bolts.
If you put the shelves on a wall of concrete or brick then only use masonry anchors to connect the platform supports.
These are the tools we need to hang the shelves
Stud Finder
Shelf supports
And Bits
Screwdriver
Carpenters Level
You will find an unlimited number of material balance for the horizontal shelves shelves utility Z-norm.
A most important tip when placing the shelves that you want to minimize the pin. The best way to prevent sagging shelves is mounting of at least 6 "(inches) from the ends of the shelves.
By following these basic tips and you will be able to build shelves for all storage problems, and also display beautiful objects.
Get everything you need for your DIY projects wood. I was in the construction industry for many years. With plans and tools that you can do any project
Start here!


For more information click here